Comments on: Arduino Flash communication AS3 – As3Glue bundle http://www.kasperkamperman.com/blog/arduino/arduino-flash-communication-as3/ Kasper Kamperman designs and creates interactive and responsive media applications for exhibitions, interior and events. He works as a teacher in the field of Art and Technology Mon, 30 Aug 2010 12:44:34 +0000 http://wordpress.org/?v=2.9.2 hourly 1 By: kasperkamperman http://www.kasperkamperman.com/blog/arduino/arduino-flash-communication-as3/comment-page-2/#comment-77 kasperkamperman Mon, 30 Aug 2010 12:37:27 +0000 http://www.kasperkamperman.com/?p=789#comment-77 I don't have time to dive into it now. I think you'll have to search if Firmata supports the Arduino Mega in the same way as the duemilanove. I think not, because it has different outputs. I don’t have time to dive into it now. I think you’ll have to search if Firmata supports the Arduino Mega in the same way as the duemilanove. I think not, because it has different outputs.

]]> By: Said http://www.kasperkamperman.com/blog/arduino/arduino-flash-communication-as3/comment-page-2/#comment-75 Said Mon, 23 Aug 2010 12:43:54 +0000 http://www.kasperkamperman.com/?p=789#comment-75 I agree with you Kadri. I also have trouble about that. In addition, when I pressed reset button there is no anything change, the loaded program still works. what a difference could be between mega and duemilanove? I agree with you Kadri. I also have trouble about that. In addition, when I pressed reset button there is no anything change, the loaded program still works. what a difference could be between mega and duemilanove?

]]> By: Arduino -> Flash serial data transmission | MapToPixel http://www.kasperkamperman.com/blog/arduino/arduino-flash-communication-as3/comment-page-2/#comment-73 Arduino -> Flash serial data transmission | MapToPixel Sat, 07 Aug 2010 16:01:09 +0000 http://www.kasperkamperman.com/?p=789#comment-73 [...] first approach is straightforward to get up and running thanks to this post on KasperKamperman.com. The second approach needs more thought in order to ensure all data is [...] [...] first approach is straightforward to get up and running thanks to this post on KasperKamperman.com. The second approach needs more thought in order to ensure all data is [...]

]]> By: Kadri http://www.kasperkamperman.com/blog/arduino/arduino-flash-communication-as3/comment-page-2/#comment-69 Kadri Thu, 29 Jul 2010 17:51:04 +0000 http://www.kasperkamperman.com/?p=789#comment-69 Hi Kasper, first of all thanks for this tutorial. It is very easy and good explained. I have a problem with my Arduino Mega. I don´t get no response. I followed all your steps. I loaded Firmata to the board. Then i configurated the serproxy as in your discription. After starting the flash program, there are no errors displayed. But on the board there is no signal on pin 13. After following your steps a couple of times i took a duemilanove Board and it works perfectly. Do you have any idea why does´nt work the Arduino Mega Board? Thanks for your answer! Cheers, kadri Hi Kasper,
first of all thanks for this tutorial. It is very easy and good explained.
I have a problem with my Arduino Mega. I don´t get no response. I followed all your steps. I loaded Firmata to the board. Then i configurated the serproxy as in your discription. After starting the flash program, there are no errors displayed. But on the board there is no signal on pin 13.
After following your steps a couple of times i took a duemilanove Board and it works perfectly.
Do you have any idea why does´nt work the Arduino Mega Board?
Thanks for your answer!
Cheers,
kadri

]]> By: Vincent http://www.kasperkamperman.com/blog/arduino/arduino-flash-communication-as3/comment-page-1/#comment-68 Vincent Wed, 28 Jul 2010 01:59:32 +0000 http://www.kasperkamperman.com/?p=789#comment-68 Hiya, thanks for the reply. Yes that site was in downtime last I checked. But I figured out what I wanted to make/do. So I went with Tinkerproxy and as3glue as you recommeneded. Having quite a lot of fun with making the Flash App and dynamic filters from pixel bender. Best regards V Hiya,
thanks for the reply.
Yes that site was in downtime last I checked. But I figured out what I wanted to make/do. So I went with Tinkerproxy and as3glue as you recommeneded.
Having quite a lot of fun with making the Flash App and dynamic filters from pixel bender.

Best regards
V

]]> By: ventolin mono http://www.kasperkamperman.com/blog/arduino/arduino-flash-communication-as3/comment-page-2/#comment-65 ventolin mono Wed, 14 Jul 2010 19:09:34 +0000 http://www.kasperkamperman.com/?p=789#comment-65 True. When Flash is listening to pins 7 and 8 with two different buttons there is no noise. True.
When Flash is listening to pins 7 and 8 with two different buttons there is no noise.

]]> By: kasperkamperman http://www.kasperkamperman.com/blog/arduino/arduino-flash-communication-as3/comment-page-2/#comment-64 kasperkamperman Wed, 14 Jul 2010 06:42:43 +0000 http://www.kasperkamperman.com/?p=789#comment-64 Since there is nothing connected to pin 7 (no ground, no 5V) it can change due electrical noise. If you watch the analog inputs you see the same effect. Change one input, and they probably change all. The solution is to wire the unused pins to ground. However, that would be just for the looks. If you didn't connect something to pin 7, you don't want to listen to it in Flash. It doesn't matter that it changes, if you don't use the values of that pin. Since there is nothing connected to pin 7 (no ground, no 5V) it can change due electrical noise. If you watch the analog inputs you see the same effect. Change one input, and they probably change all.

The solution is to wire the unused pins to ground. However, that would be just for the looks. If you didn’t connect something to pin 7, you don’t want to listen to it in Flash. It doesn’t matter that it changes, if you don’t use the values of that pin.

]]> By: ventolin mono http://www.kasperkamperman.com/blog/arduino/arduino-flash-communication-as3/comment-page-2/#comment-63 ventolin mono Wed, 14 Jul 2010 01:00:04 +0000 http://www.kasperkamperman.com/?p=789#comment-63 I was using tty instead of cu on my serial port. I don't know what's the difference but apparently it was that what caused the false positives. Although I still get some when the push button bounces. I was using tty instead of cu on my serial port. I don’t know what’s the difference but apparently it was that what caused the false positives.

Although I still get some when the push button bounces.

]]> By: ventolin mono http://www.kasperkamperman.com/blog/arduino/arduino-flash-communication-as3/comment-page-2/#comment-62 ventolin mono Tue, 13 Jul 2010 23:19:46 +0000 http://www.kasperkamperman.com/?p=789#comment-62 Hi kasperkamperman. I wired a push button switch. I'm monitoring each of the pins from 2 - 13 as digitalIn. The monitor displays two inputs at the same time when my push button is connected to one pin only. For example: Push button sends the signal to pin 8 and the monitor displays that 7 and 8 are being pressed. ¿Why is this? I already tried this with two different Arduinos. Hi kasperkamperman.

I wired a push button switch.
I’m monitoring each of the pins from 2 – 13 as digitalIn.
The monitor displays two inputs at the same time when my push button is connected to one pin only.
For example: Push button sends the signal to pin 8 and the monitor displays that 7 and 8 are being pressed.

¿Why is this?
I already tried this with two different Arduinos.

]]> By: kasperkamperman http://www.kasperkamperman.com/blog/arduino/arduino-flash-communication-as3/comment-page-2/#comment-55 kasperkamperman Sun, 11 Jul 2010 09:36:47 +0000 http://www.kasperkamperman.com/?p=789#comment-55 They are in the zip-file. They are in the zip-file.

]]> By: Ruben Gonçalves http://www.kasperkamperman.com/blog/arduino/arduino-flash-communication-as3/comment-page-1/#comment-54 Ruben Gonçalves Sun, 11 Jul 2010 01:44:42 +0000 http://www.kasperkamperman.com/?p=789#comment-54 Hello kasperkamperman, where can I get "as3glue_standalone_monitor.fla" and "as3glue_program-example.fla" ? Thanks for all :) Hello kasperkamperman, where can I get “as3glue_standalone_monitor.fla” and “as3glue_program-example.fla” ? Thanks for all :)

]]> By: kasperkamperman http://www.kasperkamperman.com/blog/arduino/arduino-flash-communication-as3/comment-page-1/#comment-53 kasperkamperman Tue, 06 Jul 2010 18:07:54 +0000 http://www.kasperkamperman.com/?p=789#comment-53 Hi Vincent, I couldn't open that website, but I think its using Processing for the serial to Xmlsocket conversion. In my version Serialproxy is used for that. You need the middleware since Flash cannot communicate directly with the serialport. Another option as middleware could be <a href="http://funnel.cc/" rel="nofollow">funnel.cc</a>. I prefer Serialproxy for most of my projects and teaching, since its the most basic option. Kasper Hi Vincent,

I couldn’t open that website, but I think its using Processing for the serial to Xmlsocket conversion. In my version Serialproxy is used for that.

You need the middleware since Flash cannot communicate directly with the serialport.

Another option as middleware could be funnel.cc.

I prefer Serialproxy for most of my projects and teaching, since its the most basic option.

Kasper

]]> By: Vincent Lee http://www.kasperkamperman.com/blog/arduino/arduino-flash-communication-as3/comment-page-1/#comment-52 Vincent Lee Tue, 06 Jul 2010 15:23:29 +0000 http://www.kasperkamperman.com/?p=789#comment-52 Great tutorial. I am using Arduino with 3 Potentiometers to talk to Flash for an interactive media project for my thesis. I was thinking of trying out ArduinoProcessingFlash with processing as the middleware from Kan Yan Li, http://a.parsons.edu/~lik43/doc/?p=859. Do you know any advantage to this? I don't think I need to use Processing really except for displaying a video onscreen as Arduino's pot. inputs trigger/respond to events in Flash/AS3. Is it more robust to just cut out Processing (the middleware)? /Vinny Great tutorial. I am using Arduino with 3 Potentiometers to talk to Flash for an interactive media project for my thesis. I was thinking of trying out ArduinoProcessingFlash with processing as the middleware from Kan Yan Li, http://a.parsons.edu/~lik43/doc/?p=859.

Do you know any advantage to this? I don’t think I need to use Processing really except for displaying a video onscreen as Arduino’s pot. inputs trigger/respond to events in Flash/AS3.
Is it more robust to just cut out Processing (the middleware)?

/Vinny

]]> By: DIY2-Seminar #05: Arduino und Flash « Bischofs Blog http://www.kasperkamperman.com/blog/arduino/arduino-flash-communication-as3/comment-page-1/#comment-45 DIY2-Seminar #05: Arduino und Flash « Bischofs Blog Sat, 26 Jun 2010 14:32:15 +0000 http://www.kasperkamperman.com/?p=789#comment-45 [...] Dann kann man unter Flash das Arduino-Board über den Webserver ansteuern (Adresse: localhost, Port: 9000). Ein paar gute Beispielprogramme für Flash gibt es hier: http://www.kasperkamperman.com/blog/arduino/arduino-flash-communication-as3/ [...] [...] Dann kann man unter Flash das Arduino-Board über den Webserver ansteuern (Adresse: localhost, Port: 9000). Ein paar gute Beispielprogramme für Flash gibt es hier: http://www.kasperkamperman.com/blog/arduino/arduino-flash-communication-as3/ [...]

]]> By: Narkia Lab - Comunicando Arduino y Flash ( AS 3.0 – As3glue ) http://www.kasperkamperman.com/blog/arduino/arduino-flash-communication-as3/comment-page-1/#comment-40 Narkia Lab - Comunicando Arduino y Flash ( AS 3.0 – As3glue ) Thu, 10 Jun 2010 14:15:11 +0000 http://www.kasperkamperman.com/?p=789#comment-40 [...] dejo una entrada completa del blog de Kasper Kamperman donde se encuentran los enlaces a los para descargar los [...] [...] dejo una entrada completa del blog de Kasper Kamperman donde se encuentran los enlaces a los para descargar los [...]

]]>